Insecta.pro → Catalog Gallery Taxonomy References Maps Community More

✖

Buy entomology pins

Community and Forum → Entomological collections → Buy entomology pins

Sergey Rybalkin, 18.11.2009 21:07

Very necessary #1 packs 5!

Comments

Pages: 1 2

18.11.2009 21:34, Victor Titov

http://www.entomon.ru/online/
Here is the link. Use this link to contact us. The company is reliable! They'll send it, I checked it myself

. And at least not 5!

This post was edited by Dmitrich - 18.11.2009 21: 35

20.11.2009 15:33, Трофим

Reaper and I would also like to buy it. For example, I need No. 1 500, No. 3 200 and nulevok 300. Maybe someone from friendly countries trades at a reasonable price in the region of $ 3 (Czech). Not by different postal orders. And so in Moscow someone or in St. Petersburg.

20.11.2009 18:09, Konung

Isn't it easier to order from the Czech Republic in Moldova?

20.11.2009 18:14, Victor Titov

Something tells me that from Moscow to entomon(e) will not be more expensive.

20.11.2009 18:50, RippeR

ordering from the Czech Republic is a real problem. It is necessary either through a bank, but there is no account, and as far as I understand from all the data - this is expensive, at least 10 euros per transfer..
Either via Western Union, but this, again, is expensive.. Western Union - shit, they charge too much and there are a lot of troubles with transfers - a lot of things to fill out, and so on.
As a result, it will be too expensive, since you also need to take shipping into account.

20.11.2009 19:22, svm2

As close as possible, in Kiev at the Ivy

Likes: 1

20.11.2009 20:03, El Cazador

I can introduce you to some good people in the Czech Republic, and they'll send you a message without any problems. Taking into account the transfer from their side and sending them money, the pack will fit into 3.2 raccoons. I bought it myself several times, not just pins, checked. If you are interested, write to me marvov@yandex.ru

Likes: 1

23.11.2009 10:48, Трофим

I received emails to my email address. But for some reason they don't show up on the forum. I will be able to purchase pins in January.

03.12.2009 18:51, kovyl

I used these pins: Karlsbader insektennadeln Original. Good in quality. Can you buy something comparable right now? And how much will it cost?

21.12.2009 14:00, Трофим

When I was still at school, I used to make pins out of steel wires (in boring lessons, which were most of them), such as is available in Christmas toys. I turned out and filled the balls with epoxy, about 400 pieces came out. What to say, the time was

06.01.2010 17:05, sergey nyu

I ordered pins through an online store, 3 years ago. №№ 1, 3, 00, 000.
Delivered without any problems, by cash on delivery, within a month. 4 packs of 100 pcs, together with the shipment, then cost me 350 rubles. I am satisfied with the quality. "nulevok" then was not, but I still have the old stocks of the 60s production "Zookombinat"

06.01.2010 18:16, Konung

4 packs of 100 pcs, together with the shipment, then cost me 350 rubles.

Cool!

now it would be like this.

06.01.2010 18:44, El Cazador

I still have old stocks of the 60s produced by Zookombinat

And the photo can be very interesting to see.

07.01.2010 11:37, sergey nyu

And the photo can be very interesting to see.

I fulfill your request, and to compare photos of pins that I purchased in the online store.

the image is no longer on the site: DSC00723.JPG

the image is no longer on the site: DSC00725.JPG

the image is no longer on the site: DSC00727.JPG

This post was edited by sergey nyu-07.01.2010 12: 38

Pictures:
DSC00723.JPG — (3.09мб) 07.01.2010 — 21.01.2010
DSC00725.JPG — (3.26мб) 07.01.2010 — 21.01.2010
DSC00727.JPG — (3.03мб) 07.01.2010 — 21.01.2010

04.05.2010 10:46, Penzyak

The quality of "Czech" entomobulavki has sharply deteriorated-bend! Perhaps the Chinese began to work on it? Is Morpho still alive?"? Or is it the same thing as the Sphinx now??

04.05.2010 11:00, vasiliy-feoktistov

The quality of "Czech" entomobulavki has sharply deteriorated-bend! Perhaps the Chinese began to work on it? Is Morpho still alive?"? Or is it the same thing as the Sphinx now??

Morpho is now called the Sphinx.

Likes: 1

13.07.2010 22:58, Bad Den

There are a number of EntoSfinks pins available.
Numbers from 00 to 3 (white, stainless steel) and from 000 to 4 (black).
The price for a pack (100 pcs.) of "black" is 2.5 euros, for a pack of "white" - 3 euros.
If you need someone, I can bring them to the congress or send them by mail. Write to your personal account.

16.07.2010 11:09, kovyl

Bad Den, wrote in PM.

16.07.2010 11:21, Bad Den

kovyl, answered by email

14.12.2010 20:34, Танав

Buy entomological pins, numbers from 00 to 4.

14.12.2010 20:48, Bad Den

Tanav, if you want, now there are 19 packs of 00 black (100 p/pack) and 6 packs of 00 stainless steel (120 p.pack).

21.12.2010 19:23, kovyl

And there are no minutiae?

21.12.2010 23:01, Black Coleopter

Buy 2 packs No. 1 and 1 pack No. 6.

03.01.2011 19:32, Трофим

In St. Petersburg, you can buy directly somewhere or, better yet, exchange pins for insects?

13.01.2011 19:27, scarabaeinae

Buy entomological dies( not transparent), and pins. Write to heliocopris193@mail.ru

13.01.2011 22:59, Pirx

Guys, no one can tell you the address(s) of entomol. shops in the Czech Republic where you can buy pins at the first price? It seems that the craving has appeared...

14.01.2011 2:59, Bad Den

www.entosphinx.cz

Likes: 1

14.01.2011 3:35, Pirx

Pasiba! Nda... Half a euro difference with Kiev prices. We will search with mother-of-pearl...

28.01.2011 13:59, Seneka

Tanav, if you want, now there are 19 packs of 00 black (100 p/pack) and 6 packs of 00 stainless steel (120 p.pack).

Wrote in pm

28.01.2011 14:37, barko

Pasiba! Nda... Half a euro difference with Kiev prices. We will search with mother-of-pearl...

And what is the price of pins in Kiev and where are they sold there?

28.01.2011 18:19, introvert

I have experience with homemade pins. If you have free time, do it yourself. I do this at work, in the evening. I use rust removal brushes, these are the ones with a wooden handle. I still have a stock of Soviet (now there are Chinese metal they have soft). If desired, you can find wire on brushes of any diameter. The wire on them is already cut to a standard length, steel. It remains only to disassemble, sharpen. The head is epoxy resin with the addition of bronze powder. The quality is almost like a SPHINX. You can wax it and paint it, but it's not necessary. With 5 brushes(different wire thicknesses) I secured myself with pins for several years.

28.01.2011 18:35, Yakovlev

do not do this - buy pins - they are inexpensive. Shoe brushes for shoemakers - pins for entomologists.

Likes: 2

28.01.2011 19:26, introvert

do not do this - buy pins - they are inexpensive. Shoe brushes for shoemakers - pins for entomologists.

The brushes are not shoe brushes.You can extend the associative series: medicine for physicians; entomology for entomologists, etc.

28.01.2011 20:02, Bad Den

I have experience with homemade pins. If you have free time, do it yourself. I do this at work, in the evening. I use rust removal brushes, these are the ones with a wooden handle. I still have a stock of Soviet (now there are Chinese metal they have soft). If desired, you can find wire on brushes of any diameter. The wire on them is already cut to a standard length, steel. It remains only to disassemble, sharpen. The head is epoxy resin with the addition of bronze powder. The quality is almost like a SPHINX. You can wax it and paint it, but it's not necessary. With 5 brushes(different wire thicknesses) I provided myself with pins for a few years.

Can I have a photo of the pins?

28.01.2011 20:46, introvert

Can I have a photo of the pins?

If we do everything ourselves with our own hands: nets, stains, screens, generators, etc. Why can't pins be made? It's not from a good life. Stupidly sorry for the money.

Pictures:

DSC07906.JPG — (768.82к)

Likes: 3

28.01.2011 20:50, vasiliy-feoktistov

If we do everything ourselves with our own hands: nets, stains, screens, generators, etc. Why can't pins be made? It's not from a good life. Stupidly sorry for the money.

They look good. And do not rust (for brushes, etc. consumables, the most crappy steel usually goes)?

28.01.2011 20:59, Pirx

And what is the price of pins in Kiev and where are they sold there?

There are no shops, a private cab. I always take it to the Institute of Zoology, where two people sell at least. The last time I took Morpho for 25 UAH, now there are 30. 1 euro = almost 11 UAH. I.e. a pack now costs from 2.5 to almost 3 euros. Entosfinks - 2 euros.

28.01.2011 21:00, introvert

They look good. And do not rust (for brushes, etc. consumables, the most crappy steel usually goes)?

If the environment is wet of course rust like any other. Wax can be insured or machine oil. But since I protect the boxes from moisture, more than my wife's honor, there are no problems. The heads on the pins hadn't failed yet, either. And as for iron, in our country for all sorts of crap, such as brushes, a good steel wire goes.

28.01.2011 21:02, Bad Den

If we do everything ourselves with our own hands: nets, stains, screens, generators, etc. Why can't pins be made? It's not from a good life. Stupidly sorry for the money.

Mmmm... The quality to the factory is still not enough (some pins in the photo are crooked). If it's not a secret, how long does it take to make one pin (cutting wire, sharpening (on an emery wheel?), surfacing a glovka)?

Pages: 1 2

New comment

Note: you should have a Insecta.pro account to upload new topics and comments. Please, create an account or log in to add comments.

* Our website is multilingual. Some comments have been translated from other languages.

Random species of the website catalog

News

17.11.2024: Импортированы и переведны последние свежие сообщения с форума. Обновлена страница «О сайте».
11.11.2024: The Community/Forum section has become more convenient
11.11.2024: Improved scaling of images in the Forum/Community