Features of light catching

Yes, Alexander, you didn't take care of yourself at all then! This is a hard ultraviolet light, and not all sorts of glasses will help with this.. It looks terrifying, and Pearl probably looks like a joke.

I also dabbled in it when I was young. By the way, quite a safe thing, especially when in an undisclosed form. After all, it is directed action! You set the timer for 15 minutes, turn on the usual light bulb above it and sit at it, calmly drinking coffee. As soon as the installation is turned off , you go and calmly collect everything you need. Rushing at her, of course fool. Two minuses-dokhrena of any trifles burns-it lies in a pile under the installation and stinks of fawn. Well, and, the car inverter does not pull - only it was necessary to power it from the network. And in the woods and fields, where will you find this net? I had to give up and switch to UV-savings.

You set the timer for 15 minutes, turn on the usual light bulb above it and sit at it, calmly drinking coffee. As soon as the installation is turned off , you go and calmly collect everything you need. Rushing at her, of course fool. Two minuses-dokhrena of any trifles burns-it lies in a pile under the installation and stinks of fawn. Well, and, the car inverter does not pull - only it was necessary to power it from the network. And in the woods and fields, where will you find this net? I had to give up and switch to UV-savings.

To be honest, I didn't think about the timer! It is worth considering this option. Well, as for "not pulling", you can now use the generator! Thanks for the interesting tip

To be honest, I didn't think about the timer! It is worth considering this option. Well, as for "not pulling", you can now use the generator! Thank you for the interesting hint

So they went with the timer. I don't know right now. And, so that the burnt midge does not stink all over the neighborhood, you can fix a small metal mesh in front of the lamp.
You can, of course, and a generator, but I have somehow got used to the inverter.

As far as I understand (unfortunately, I have never used it myself), it is difficult to power the DRL from the inverter, and you use energy-saving options. I just immediately went the other way. I agree, this increases costs, but also gives an appropriate result. In addition to the DRL 250, I use an energy-saving UV lamp. I doubt that my kilowatt unit will pull the DRL 250 and an equally powerful UV lamp, but I would like to try it. One of my colleagues drives with two generators, putting them in different biotopes! Perhaps I will come to this too ) Then it will be possible to use full-fledged UV without any problems. Remotely!

As far as I understand (unfortunately, I have never used it myself), it is difficult to power the DRL from the inverter, and you use energy-saving options. I just immediately went the other way. I agree, this increases costs, but also gives an appropriate result. In addition to the DRL 250, I use an energy-saving UV lamp. I doubt that my kilowatt unit will pull the DRL 250 and an equally powerful UV lamp, but I would like to try it. One of my colleagues drives with two generators, putting them in different biotopes! Perhaps I will come to this too ) Then it will be possible to use full-fledged UV without any problems. Remotely!

Well, I have a garland of 3 UV-savings. I'm sitting in the car, watching.

Pictures:

29.07.2020_2_1_.png — (1.38мб)

Well, I have a garland of 3 UV-savings. I'm sitting in the car, watching.

I don't understand the purpose of the garland. Increase power? You can put a more powerful savings account, the Chinese have all sorts.
If you use a garland, then from lamps of different spector. The best result will be given by three light bulbs on three screens, in different biotopes. And walk between them, and you don't have to sit in the car.

In my case, the DRL 250 with the screen is somewhere like this. That's just energy-saving ultraviolet I put 15 meters to the side. The generator is also hidden in the rocks ) Western Sayan Mountains, at sunset. May 18. The first high-altitude night fishing last season..

Pictures:

_______.jpg — (764.6к)

I don't understand the purpose of the garland. Increase power? You can put a more powerful savings account, the Chinese have all sorts.
If you use a garland, then from lamps of different spector. The best result will be given by three light bulbs on three screens, in different biotopes. And walk between them, and you don't have to sit in the car.

The only goal is to raise the light source as high as possible. Medium - align the light flow from top to bottom. Well, the third one is the bottom one just above the screen. Sberegayki-still yes! chinese. I took the most powerful ones 2 years ago. And to put 3 screens in different biotopes - do not run into-between different biotopes the distance is far from one kilometer! I go through the fields in a day and run like a chihua-hua to hua-hua kilometers. So it's better to sit in the car and drink coffee in some comfort.

In my case, the DRL 250 with the screen is somewhere like this. That's just energy-saving ultraviolet I put 15 meters to the side. The generator is also hidden in the rocks ) Western Sayan Mountains, at sunset. May 18. The first high-altitude night fishing last season..

What kind of screen material do you use?

What kind of screen material do you use?

I may be wrong, since I bought it about 5 years ago, but, in my opinion, organza. Dries quickly after rain, wash once a year, after the end of the season. When in contact with a working DRL 250, it may darken, but it didn't melt for me. Quite strong, because in the mountains or in the steppe, with unexpected gusts of wind, I sometimes additionally support it with dry branches or small snags - in short, with what is lying under my feet. You can buy it at any fabric store.
The whole thing is attached to an aluminum tube (collapsible) frame using Velcro strips. It is clear that everything is homemade.

This post was edited by Roman1963-18.01.2021 20: 15

Good afternoon! I ordered an inverter generator HYUNDAI HHY 1000Si nominal 0.9 kW, I want to start the DRT 220 lamp in the WINDOW 11 lamp. The starting current of this lamp is 6 amps, although it is not a fact that 220 volts are supplied to it at the same time, no more than 850 VA is written in the passport, which gives us 680 watts of power. But this is all a theory, someone started 220 DRT or PRK 4 from a kilowatt?

This post was edited by zerg69 - 03/27/2021 01: 53

Good afternoon! I ordered an inverter generator HYUNDAI HHY 1000Si nominal 0.9 kW, I want to start the DRT 220 lamp in the WINDOW 11 lamp. The starting current of this lamp is 6 amps, although it is not a fact that 220 volts are supplied to it at the same time, no more than 850 VA is written in the passport, which gives us 680 watts of power. But this is all a theory, someone started 220 DRT or PRK 4 from a kilowatt?

And why such difficulties? DRL 250 through the throttle comes even from 700 padded jacket with a bang. Most of them do. If you really want a hardball - break the external bulb DRLki and get the same quartz lamp, only easier and cheaper.

And why such difficulties? DRL 250 through the throttle comes even from 700 padded jacket with a bang. Most of them do. If you really want a hardball - break the outer bulb DRLki and get the same quartz lamp, only easier and cheaper.

Because I don't like collective farm amateur activities, there are DRT lamps in the lamps from the factory, you don't need to prick anything. On the DRT 125, I caught a lot complete with the UFO-B lamp, this is a small light lamp and it flies perfectly, I never had any problems with my eyes. But on OKN-11 with a DRT 220 lamp, it flies even better, even on moonlit nights the result is amazing. But there are also disadvantages, very heavy, high inrush current and very hard flow, you need to protect your eyes. The inrush current of the DRT 220 is greater than that of the DRL 250, 6 amps versus 4.5. This point is not clear to me.

This post was edited by zerg69 - 03/27/2021 20: 22

I have a question.
I've been fishing for UV 12 V 15 W for two years. Powered by lithium-ion batteries. There are no questions, enough for the dawn amount of time.
This year, I purchased a large power bank with both USB Ta and UCB-c outputs up to 18 V and 2 Amps. Power Bank supports both fast charging of both itself and phones. But 12 v to the lamp only through 5 v to 12 V converters. But they are low-power and from 15 W lamps quickly heat up. 20 min. They write that they work stably from 0.5-0.8 a. Of course, you can change it in 15 minutes, but you can't get away with such a lamp. The idea was to enable it directly via usb-c. But ... They don't burn. Do not light up and if you connect via an 18 v charger. Thought marriage, ordered a couple of different manufacturers. Same effect. The 9 V router starts, but the 3 W lamp of 12 V is no longer there. Question: how much does this happen, because it can produce up to 18 V and 2 A.
And how to deal with it. How to achieve stable operation of a 15W lamp. Links to ready-made converters are generally welcome, preferably from Ali Express. I held a soldering iron in my hands, but mainly for soldering wires.

The post was edited by Djon-01.04.2021 00: 11

Tinplate)
A converter for such power like this is needed
https://7lux.com.ua/p840047923-povyshayusch...tc1871-100.html
But it will not work normally, because the powerbank is not designed for this, it should output a current of approx. 3.5 A for this power through its built-in converter. The ends on a straight line from the battery need to be thrown.
And fast charging is generally controlled by the phone and is absolutely not designed to power anything from it

Why shouldn't I?
the characteristic indicates 12 V. 1.5 am. I have 12 V does not give out at all, even on a 3 W LED lamp.
Feature:
Output connectors (can charge 3 devices simultaneously, 3A total output):
USB 5V 3A / 9V 2A / 12V 1.5 A
USB 5V 2.1 A
Type-C (Two-way) 5 V 3 A / 9 V 2 A / 12 V 1.5 A

Why shouldn't I?
the characteristic indicates 12 V. 1.5 am. I have 12 V does not give out at all, even on a 3 W LED lamp.
Feature:
Output connectors (can charge 3 devices simultaneously, 3A total output):
USB 5V 3A / 9V 2A / 12V 1.5 A
USB 5V 2.1 A
Type-C (Two-way) 5V 3A / 9V 2A / 12V 1.5 A

In order for it to start issuing such a voltage, the consumer and the paverbank must "agree"on this.
A quick Google search showed that there are "QC trigger"devices - https://www.youtube.com/watch?v=_U28cASPLgc
Then go ahead yourself

In general, I checked in practice, DRT 220 from the kilowatt generator does not start, it gives an overload. Let it hang for history, you never know who will need it.

I bought an umbrella with a diameter of 240 cm to protect the screen from rain.
The bed sheet of my Entosphinx screen is 110 x 110.
The screen just fits under the umbrella, and it will protect it well from direct rain.
The water-filling base for such an umbrella is heavy and voluminous - I can't carry it in a small car. So I bought a sharpened pipe for driving it into the ground, so that it could be driven close to the sheet.
Umbrella - 3100 rubles. Pointed pipe with wing screw for driving into the ground (on special order) - 1000 rubles. Delivery to Moscow - 500 rubles. Or you can pick it up yourself in Shchapovo near Podolsk.
The length of the umbrella when folded is 150 cm.
Barrel thickness (steel) - 3 cm.
I will give you a contact, if anyone needs it, - write in the personal account )



This post was edited by PhilGri - 11.04.2021 12: 00

As a result, I took the lamp UFO-03-250N in it there is a DRP of 250, the power of the entire product is 700W/250W lamps, respectively. An inverter rated at 900 watts pulls it perfectly. Today I went out and tried it, scoops and some moths are flying. I did not catch just tried it out, there is a bite))).

In general, I checked in practice, DRT 220 from the kilowatt generator does not start, it gives an overload. Let it hang for history, you never know who will need it.

True, you need a trigger for the desired voltage, but there will still be an extra voltage converter.
It is easier to use just a lithium battery and a current driver for the desired LED matrix.

The only goal is to raise the light source as high as possible. Medium - align the light flow from top to bottom. Well, the third one is the bottom one just above the screen. Sberegayki-still yes! chinese. I took the most powerful ones 2 years ago. And to put 3 screens in different biotopes - do not run into-between different biotopes the distance is far from one kilometer! I go through the fields in a day and run like a chihua-hua to hua-hua kilometers. So it's better to sit in the car and drink coffee in some comfort.

What's the point of raising the light source higher? Butterflies they do not walk on the ground like people, but fly at a height. So at least 30 cm, at least 3 meters from the ground, install the lamp, the butterflies will see it anyway. Moreover, every time for this purpose, chopping an aspen tree is a waste of time and effort.

I bought an umbrella with a diameter of 240 cm to protect the screen from rain.
The bed sheet of my Entosphinx screen is 110 x 110.
The screen just fits under the umbrella, and it will protect it well from direct rain.
The water-filling base for such an umbrella is heavy and voluminous - I can't carry it in a small car. So I bought a sharpened pipe for driving it into the ground, so that it could be driven close to the sheet.
Umbrella - 3100 rubles. Pointed pipe with wing screw for driving into the ground (on special order) - 1000 rubles. Delivery to Moscow - 500 rubles. Or you can pick it up yourself in Shchapovo near Podolsk.
The length of the umbrella when folded is 150 cm.
Barrel thickness (steel) - 3 cm.
I will give you a contact, if anyone needs it, - write in the personal account )

Why do you need this umbrella? To be afraid of rain, not to go after butterflies - a popular saying. There's enough junk in the car without it, and you can also hide from heavy rain in it. Moreover, this umbrella will cover the lamp not only from rain, but also from butterflies.

What's the point of raising the light source higher?

Terrain, trees.

In my case, the DRL 250 with the screen is somewhere like this. That's just energy-saving ultraviolet I put 15 meters to the side. The generator is also hidden in the rocks ) Western Sayan Mountains, at sunset. May 18. The first high-altitude night fishing last season..

What is the point of a gable screen? In the same place, under the "roof", a dead zone is formed, where everything is clogged and you can't get it quickly. Energy-saving lamp in 15 meters why, there is a second screen or something?

What is the point of a gable screen? In the same place, under the "roof", a dead zone is formed, where everything is clogged and you can't get it quickly. Energy-saving lamp in 15 meters why, there is a second screen or something?

Initially, the meaning was that the DRL 250, fixed to the upper crossbar of this structure, did not touch the screens and did not melt them. The inverted V-shaped structure, based on the principle of a children's swing, was chosen for greater stability. I often fish in the steppe or in the mountain tundra, on rocky scree. It is problematic to attach a traditional screen there, there is simply nothing to tie it to. As many years of practice have shown, my design is very stable. In the steppe, I just stick its legs in the ground, and in the mountains I put stones around it.
Separately, about the "dead zones" under the "roof". I'm sure you've also noticed that different species behave differently when fishing for light. Some people prefer the outer part of the screen, while others prefer the inner part. Some of them ignore the screen altogether, flying past it and disappearing into the darkness. I understand that the photo is crappy, but it gives an approximate idea of the design. Its height is 2 m. I don't remember the width, but I move quite freely under it with a stain at a height of 187 cm. Sometimes there, under the roof or below, on the grass come across completely different specimens than on the outdoor screens. So there are no dead zones there. I never dropped it or broke it.
A separate lamp with a small screen is UV. In my practice, in spring and autumn, ultraviolet light does not give an additional effect. But in the summer, quite different species sometimes fly to it. As an example, last August, in the Kuznetsk Alatau, the bear grammia obliterata came to UV. The fact that it is ultraviolet and explains why the lamp and the small screen are separate and at a distance from the main one. I occasionally go up to it, quickly collect the necessary butterflies in a separate stain with the inscription UV and retreat to the screen with the DRL 250. This year, I slightly extended the wires and will put UV at a greater distance from myself. At the same time, I may also increase its capacity )

It's strange, t K. DRL 250 itself gives more UV-A than this energy-saving device. Perhaps some species are attracted by ultraviolet light, but are repelled by visible light?

Initially, the meaning was that the DRL 250, fixed to the upper crossbar of this structure, did not touch the screens and did not melt them. The inverted V-shaped structure, based on the principle of a children's swing, was chosen for greater stability. I often fish in the steppe or in the mountain tundra, on rocky scree. It is problematic to attach a traditional screen there, there is simply nothing to tie it to. As many years of practice have shown, my design is very stable. In the steppe, I just stick its legs in the ground, and in the mountains I put stones around it.
Separately, about the "dead zones" under the "roof". I'm sure you've also noticed that different species behave differently when fishing for light. Some people prefer the outer part of the screen, while others prefer the inner part. Some of them ignore the screen altogether, flying past it and disappearing into the darkness. I understand that the photo is crappy, but it gives an approximate idea of the design. Its height is 2 m. I don't remember the width, but I move quite freely under it with a stain at a height of 187 cm. Sometimes there, under the roof or below, on the grass come across completely different specimens than on the outdoor screens. So there are no dead zones there. I never dropped it or broke it.

Yes, it looks smaller in the photo than it actually is. I believe that the design weighs quite a lot and it is not quick to assemble it, and not everyone will make one for themselves without welding experience. Wouldn't it have been easier to use a ready-made solution in the form of petal-arc screens?

Yes, it looks smaller in the photo than it actually is. I believe that the design weighs quite a lot and it is not quick to assemble it, and not everyone will make one for themselves without welding experience. Wouldn't it have been easier to use a ready-made solution in the form of petal-arc screens?

On the contrary, this design weighs less than a kilogram. It consists of aluminum tubes purchased at a regular hardware store. Experimentally, I picked up two diameters that fit snugly into each other. The larger diameter was used for joints, and the smaller one for the base of the structure. The joints are 20 cm long, and the main tubes are 1m long. When assembled, the whole structure looks like a case with a pair of fishing rods and weighs about the same. The whole thing cost about 2 thousand rubles, if I'm not mistaken. The main costs are the payment of the welder, to whom I provided my drawing and self-sawn pipes. I put and disassemble all this farm in 5 minutes. As for the weight, 90 % of it is the throttle and alternator. It is clear that the car is necessary. In my opinion, relatively serious night fishing in Siberia is difficult to carry out without a car.
For me, in the fishing season, it is common to finish the main work a little earlier and rush 50-200 kilometers, catch and return home in the daytime. You can't do without wheels here.
Of course, I thought about ready-made screens. They are probably good, but they would have to be ordered at least from Moscow. So I decided to try the hand made option. I don't feel the need to change anything yet

An umbrella is needed so that the screen and sheet do not get wet. After any rain, even a short one, the entire screen is littered with water droplets, and puddles collect on the sheet. Any butterfly that gets into these puddles instantly gets wet and loses some of its scales. Half of the dustpans and almost all the moths that sit on the sheet after a rainstorm are already of little use for the collection.

Why do you need this umbrella? To be afraid of rain, not to go after butterflies - a popular saying. There's enough junk in the car without it, and you can also hide from heavy rain in it. Moreover, this umbrella will cover the lamp not only from rain, but also from butterflies.

Why do you need this umbrella? To be afraid of rain, not to go after butterflies - a popular saying. There's enough junk in the car without it, and you can also hide from heavy rain in it. Moreover, this umbrella will cover the lamp not only from rain, but also from butterflies.

An umbrella is necessary to collect decent material, and not a mess of mud, water and leavened butterfly carcasses. A more radical protection option is possible-an awning. Mine is 4 by 6 m and under it, in extreme cases, you can also place the generator. Last year, on July 26, I went fishing in a subalpine meadow in the taiga high-mountain zone, on the Abakan ridge of the Western Sayan. I got up right on the abandoned taiga road. And after 2 hours, such a "rain" went that on the road just the river flowed out of water and mud 10-15 cm deep. At the same time, the butterflies flew be healthy! Well, how in this situation to catch without protection from water? I first covered the generator with polyethylene, and when a water flow started along the road (it was going downhill from the mountain), I simply dragged it under the awning, putting it outside the road border, where there was less water.

Inspired by my observations of LED spotlights, this year I bought an LED light bulb instead of the energy-saving lamp that I used to shine through the window.:




As far as I remember, I had a 15-watt savings bank. So, the diode lamp at the declared 10 W shines twice as bright, if not more, almost as bright as a 60W incandescent lamp. According to the results of the glow, a consistently large number of incoming flies and beetles caught my eye. Last night, even a stag beetle showed up, something I'd never seen on my balcony before. There are always lots of ladybirds. But there aren't enough butterflies. But it seems that June just turned out not to be a butterfly one - a lot of caterpillars and pupae died in the first decade from the abnormal "rainy season". In general, the verdict is unequivocal: in diodes - power!

Inspired by my observations of LED spotlights, this year I bought an LED light bulb instead of the energy-saving lamp that I used to shine through the window.:




As far as I remember, I had a 15-watt savings bank. So, the diode lamp at the declared 10 W shines twice as bright, if not more, almost as bright as a 60W incandescent lamp. According to the results of the glow, a consistently large number of incoming flies and beetles caught my eye. Last night, even a stag beetle showed up, something I'd never seen on my balcony before. There are always lots of ladybirds. But there aren't enough butterflies. But it seems that June just turned out not to be a butterfly one - a lot of caterpillars and pupae died in the first decade from the abnormal "rainy season". In general, the verdict is unequivocal: in diodes - power!

Completely unsuitable for catching butterflies in conditions other than the city window of an apartment. In May, I was in Dosang, on the territory of the anti-plague station, they have such energy-saving devices. I have a DLR-125 and two DRV-160 on two screens. In general, I had all the fauna. There were a few midges on their lamps, and that was all. So this is not a power, but a bridge!

Think before you write shit. It is obvious to anyone who is even slightly friendly with banal logic that what works in the window of a city apartment surrounded by a thuja heap of light pollution away from the city will only work better. But, of course, everything is relative, and the 10 W LED does not play against the 125 W DLR. This is a 100W LED floodlight, which I wrote about last year. But, interestingly, in searchlights of different brands there are slightly different diodes and not everything flies well. One of the spotlights in the shop I mentioned died after three years of nightly operation, and it was changed to another model. It seems to be shining just as brightly, although the shade is slightly colder. They fly to the two remaining old ones, and this new one is bypassed. Don't consider it an advertisement. By the way, LED bulbs are also different, with different color temperatures and brightness (with the same declared power). Maybe. other flights will be worse or better, I didn't check them.

Your miracle lamp won't work outside the city either. Checked more than once and not only by me. Tested specifically on butterflies because flies, ladybirds or mosquitoes are of little interest to me and my colleagues. Floodlights are also a problem. Very bright, the light is more likely to scare away butterflies than attract. In addition, such spotlights, as in diode energy-saving lamps, have a small component of ultraviolet radiation, which attracts butterflies. I often hear it when traveling, from the local population. They say that there are not enough butterflies to fly, maybe they died out, and I answer them, no, they just replaced the lamps in your lanterns, that's the whole secret of "extinction"

Still, you are not friends with banal logic - it's sad...

In recent days, butterflies have also flown to my LED light bulb (in the city), especially micra. And my macra is excellent and flies right through the window on Ilyich's light bulb.

PS We still have in the lanterns, where there is no DNAT, there is DRL, and almost nothing flies on them, unlike the nearby LED spotlights. Probably, the laws of physics work differently in the city than outside the city

What a banal logic, this is biology, not mathematics, many processes do not obey the usual, human logic. Yes, you have an amazing place that nothing flies on the AWL, but white spotlights fly. Or maybe it's wishful thinking?)))))))

Or maybe your spotlights are shitty?
The logic is universal. If in the thick of light pollution a certain lamp flies, then in the wild it will fly even more-this is elementary! If, of course, there is someone to fly there. And no matter how many times I've seen DRL lights in my life, I don't remember ever seeing a larger crowd of insects around me than around other types of white lamps of similar brightness.

Or maybe your spotlights are shitty?
The logic is universal. If in the thick of light pollution a certain lamp flies, then in the wild it will fly even more-this is elementary! If, of course, there is someone to fly there. And no matter how many times I've seen DRL lights in my life, I don't remember ever seeing a larger crowd of insects around me than around other types of white lamps of similar brightness.

Then you need to change your nickname

Have you ever fished outside the city lights at all? I've been fishing and fishing away from alternative, parasitic lighting. And I know that outside of the city on the energy saving lawn, nothing flies. Even if there are spotlights somewhere, they do not interfere with fishing in any way, they are simply "sterile".

Alaverdi: Have you ever fished in the city at all? Obviously not, otherwise we would understand how much more difficult it is than in the open field. Although this is even purely speculative obvious (but, apparently, not only for everyone ).

Of course, I have fished many times outside the city-lafa is simple. In 90% of cases, you can not really shine at all: you go through the steppe with a headpiece and a net, and all the butterflies are yours. Although, of course, shooting directly from the screen with a stain is much easier, more convenient and more useful for the safety of the material. But I catch butterflies almost exclusively for one purpose - for food, I don't care about safety. But in the city, horseradish is so caught, you need to either shine yourself, or carefully examine the places where others have shone for you. So, under the AWL, a full shin is observed much more often than under LED spotlights of comparable brightness. But, I repeat, there are also incorrect LED spotlights, which seem to shine brightly, and they fly low tol